Pressure switch well tank and other components explained.
Residential water well systems diagram.
This illustration is intended to represent some of the components that can be included in a water well system and is not intended as an installation guide.
Check local or state codes for actual requirements and restrictions.
A modern water well is an expertly engineered and constructed method of delivering groundwater for drinking irrigation and other purposes.
Below are descriptions of the basic components found in a private water well.
Most well water is pumped out of the ground automatically using a submersible pump or a jet pump that sits on top of the ground and draws water out of the ground to create water pressure for the home.
The pressure switch turns the pump on when the pressure drops and off when the pressure.
Well casing is the tube shaped structure placed in the well to maintain the well opening from the target ground water to the surface along with grout the casing keeps dirt and excess water out of the well.
An overview and description of typical residential well water system components.
Jet pumps are mounted above the well either in the home or in a well house and draw the water up from the well through suction see single drop jet pump system diagram on next page.
The submersible pump pushes water up through the drop pipe to the surface.
Lead free and stainless products for every application.
Jet pumps typically located in a pump house or basement draw water from the well to the pump and are less efficient and noisier than submersible pumps.
Some well water systems use a large storage tank to store the water before it is pumped again to the house.
The quality water system products described here and illustrated on the front page are some of the baker water systems products used in a typical well system.
A leading manufacturer of quality products for residential and light commercial water systems sewage effluent sump pump water filtration and treatment systems.
Residential water well systems water filtration and water treatment systems.
The basic standard pressure residential water well system with a steel sleeve wellhead looks like the diagram below.